Deck staining vs. deck painting
Staining and painting both protect wood, but they do it differently — and that difference drives pricing, client expectations, and your maintenance revenue. Stain penetrates the wood grain, letting the natural texture show through while protecting against moisture and UV. Paint sits on top, forming a film that hides the grain but is more prone to peeling and chipping over time.
Many contractors recommend stain for decks because it handles foot traffic and weather expansion better than paint. When paint cracks, moisture gets trapped underneath and accelerates rot. When stain wears, it fades gradually and can be recoated without scraping. This makes staining a recurring service — decks need maintenance every 1–5 years depending on stain type, which creates a reliable revenue stream for contractors who track their clients' maintenance schedules.
Cost by deck size
The table below shows typical price ranges for professional deck staining, including cleaning/prep, one to two coats of semi-transparent stain, and professional labor. Actual prices vary by stain type, deck condition, and regional labor rates.
| Deck Size | Square Footage | Typical Cost Range |
|---|---|---|
| Small deck | 100–200 sq ft | $400–800 |
| Medium deck | 200–400 sq ft | $700–1,400 |
| Large deck | 400–600 sq ft | $1,200–2,200 |
| Multi-level / complex | 600+ sq ft | $2,000–4,000+ |
Multi-level decks command a premium because of additional railing, stairs, varied heights, and access challenges. A two-level deck with wrap-around railings can easily take twice the labor of a simple rectangular platform of the same total area.
Stain types and coverage rates
Stain opacity directly affects coverage, durability, and how often the deck needs retreatment. Each type serves a different client need.
| Stain Type | Coverage | Reapplication Cycle | Best For |
|---|---|---|---|
| Transparent / natural | 200–350 sq ft/gal | Every year | New wood, premium species where grain is the feature |
| Semi-transparent | 200–300 sq ft/gal | Every 2–3 years | Most popular — shows grain with added UV/moisture protection |
| Semi-solid | 150–250 sq ft/gal | Every 3–4 years | Older wood with imperfections to mask, moderate grain visibility |
| Solid stain | 100–200 sq ft/gal | Every 4–5 years | Maximum coverage, hides grain (behaves more like paint) |
Maintenance revenue: A deck stained with semi-transparent stain needs retreatment every 2–3 years. If you track completion dates and send reminders, deck maintenance becomes a predictable, recurring revenue stream with minimal sales effort — the client already trusts you with their deck.
For coverage data across all painting surfaces, see our Paint Coverage Rates by Surface reference.
Labor rates for deck staining
Deck staining labor varies dramatically by surface type. Flat decking goes fast; railings and balusters are slow, detail-intensive work that drives up the per-square-foot price of any deck with perimeter rails.
| Task | Method | Production Rate |
|---|---|---|
| Deck surface | Brush / roll | 100–150 sq ft/hr |
| Deck surface | Spray + back-brush | 200–300 sq ft/hr |
| Railings and balusters | Brush (detail work) | 50–75 LF/hr |
| Steps | Brush / roll | 15–25 sq ft/hr per step |
PriceTable's starter deck rate is one rate for the whole deck, rails and posts included: 110 sq ft/hr by brush or roll, 1.3× sprayed, 1.15× with spray and back-brush (1.3× means 1.3 times as many square feet an hour). The brush rate sits at the slow end of the typical range above, and spray and back-brush (110 × 1.15 = about 127 sq ft/hr) sits below it, so the starter is on the cautious side; set your crew's own rate.
Spray and back-brush is faster than brushing alone and works the stain into the grain on large deck surfaces — spray applies stain quickly while the back-brush ensures even penetration and prevents pooling. Railings are almost always brushed by hand because spray overshoot wastes material and creates cleanup issues on adjacent surfaces.
For a complete breakdown of painting and staining production rates, see our Painting Labor Rates Guide.
Prep work for deck staining
Deck prep is where the real time goes — and where most estimating mistakes happen. A deck that looks "ready to stain" almost never is. Proper prep ensures the stain penetrates evenly and lasts through its full maintenance cycle.
| Prep Task | Production Rate | Notes |
|---|---|---|
| Power washing | 400–1,000 sq ft/hr (PriceTable's starter: 400) | Removes dirt, mildew, and old stain residue. Follow your stain maker's prep guide; Sherwin-Williams' SuperDeck guide calls for 1,200–1,400 PSI with a 45° tip held 8–12 inches from the wood. Too much pressure damages the grain. |
| Sanding (if needed) | 100–200 sq ft/hr | Required for rough grain, splinters, or previously painted decks. 60–80 grit for heavy work, 100 grit for finishing. |
| Brightener application | 200–400 sq ft/hr | Restores wood's natural color and opens pores after power washing. Especially important for grayed, weathered wood. |
| Dry time | Until completely dry | Wood must be dry before staining. Check the stain's label for the moisture limit. Weather dependent — plan accordingly. |
Scheduling tip: Always schedule deck staining as a two-visit job: Day 1 for power washing and brightener, a later day for staining, once the wood is completely dry. Washing and staining on the same day is a common cause of stain adhesion failure and callbacks.
Worked example: medium deck estimate
A 14 × 22 ft deck (308 sq ft) with perimeter railings on three sides (44 LF) and 4 steps. One coat of semi-transparent stain, spray + back-brush on surface, brush on railings and steps. Coverage is PriceTable's starter semi-transparent deck stain: 185 sq ft/gal sprayed and back-brushed, 225 brushed, with its own 10% waste allowance. PriceTable defaults decks to two coats; this example prices one and shows what a second adds.
Deck surface: (308 ÷ 185) × 1 coat × 1.10 waste = 1.83 gal
Railings: (44 LF × 2 ft height = 88 sq ft ÷ 225) × 1.10 = 0.43 gal
Steps: (4 steps × 3 sq ft = 12 sq ft ÷ 225) × 1.10 = 0.06 gal
1.83 + 0.43 + 0.06 = 2.32 gal → 2 gallons + 2 quarts
Total material: 2 gallons @ $45 + 2 quarts @ $15 = $120
Deck surface (spray + back-brush): 308 ÷ 250 sq ft/hr = 1.23 hr
Railings (brush): 44 ÷ 60 LF/hr = 0.73 hr
Steps (brush): 4 steps × 3 sq ft each ÷ 20 sq ft/hr = 0.60 hr
Setup / cleanup: 0.75 hr
Total staining labor: 1.23 + 0.73 + 0.60 + 0.75 = 3.31 hr → 3.5 hr
These use the typical rates in the table above. At PriceTable's starter rate for spray and back-brush (110 × 1.15 = about 127 sq ft/hr, rails and posts included), the deck alone would take about 2.4 hours.
Power washing: 308 sq ft ÷ 750 sq ft/hr = 0.41 hr + railings/steps ≈ 0.75 hr
Brightener: 308 sq ft ÷ 300 sq ft/hr = 1.03 hr + railings ≈ 1.25 hr
Total prep labor: 2.0 hr
| Component | Cost |
|---|---|
| Materials (stain) | $120 |
| Labor — staining (3.5 hr @ $50/hr) | $175 |
| Labor — prep (2.0 hr @ $50/hr) | $100 |
| Equipment (power washer rental if needed) | $75 |
| Subtotal (cost) ($120 + $175 + $100 + $75) | $470 |
| Price at a 45% gross margin (cost ÷ 0.55; gross profit $385) | $854.55 |
| Selling price | ~$855 |
This 308 sq ft deck lands at about $855, inside the medium-deck range ($700–1,400). A second coat adds about 2.3 gallons (another 2 gallons + 2 quarts, $120) and about 2.6 hours of labor (1.23 + 0.73 + 0.60 = 2.56 hr, about $130), before margin.
Factors that affect deck staining cost
- Deck condition: A well-maintained deck that just needs a wash and fresh coat is a different job than one with peeling solid stain, gray weathering, or soft spots. Poor condition can double prep time.
- Height and access: Elevated decks that require ladders or scaffolding for underside and railing work take longer. PriceTable doesn't apply height or access factors to decks, so raise your deck rate for hard-to-reach work.
- Railings and balusters: A deck with ornate balusters on all four sides can have more labor in the railings than in the deck surface itself. Count and price them separately.
- Number of coats: Transparent and semi-transparent stains on dry, thirsty wood may soak in and require a second coat. Solid stains almost always need two coats for proper film build.
- Wood species: Hardwoods like ipe absorb stain differently than pressure-treated pine. Exotic woods often need specialty products and longer prep.
- Weather window: Staining needs dry weather before and after; follow the stain's label. In humid climates or rainy seasons, scheduling constraints may affect pricing.
Estimating deck work with PriceTable
PriceTable handles deck and exterior staining as part of its job scope system. Enter the deck's size, rail length and height, stair treads and posts, choose the stain product, and the calculator uses your catalog's stain coverage and your own deck rate (starter 110 sq ft/hr), which you can tune to the figures above. Prep work is scoped per surface with your standard rates.
The result is a detailed, professional estimate you can present on-site — or use the estimate template framework to present tiers with different stain lines for the same deck. Try the free deck and fence stain calculator. For the full estimation methodology, see our Painting Estimating Guide, or test the math with our free painting calculator.
See how PriceTable works for painting contractors, check pricing, or ballpark a whole job with the free painting cost estimator.