Deck Dimensions

Total linear feet of all railing sections. Both faces of a 3 ft rail are counted, about 6 sq ft per foot.
Each step adds about 6 sq ft

Stain Details

Rolled or brushed. Sprayed: 195 and 175.
PriceTable's starter deck stain adds 10%, deck paint 12%
Standard-line deck stains in PriceTable's starter catalog cost the painter $35–$55 a gallon

Results

Total stainable area 592 sq ft
Gallons needed 2.89 gal
Recommended Purchase
Buy 3 × 1-gallon cans
Staining labor —
Prep labor —
Your Cost
Materials (stain) —
Staining labor —
Prep labor —
Your Cost —
Stain and crew time at your rate. Before setup, travel, overhead and profit.

Stain type comparison

Stain Type Durability Reapply Cycle Appearance
Transparent 1–2 years Annually Shows full wood grain; natural look
Semi-Transparent 2–3 years Every 2–3 years Tinted; grain still visible
Semi-Solid 3–5 years Every 3–4 years Heavy pigment; grain partially hidden
Solid Stain 4–6 years Every 4–5 years Opaque; looks like paint but penetrates

This calculator uses the coverage of PriceTable's starter products: semi-transparent stain covers 225 sq ft per gallon on a deck and 250 on a fence; solid color deck paint 200 and fence paint 300. Sprayed, each covers 0.87 times as much, because some paint drifts away as overspray.

Prep requirements by condition

Condition Prep Required Rate Used
Good Power wash, let dry 24–48 hours 400 ft²/hr (wash)
Weathered Power wash + wood brightener, dry 48 hours 80 ft²/hr (wash 400, then brightener 100)
Previously stained Power wash + sand or chemical strip, dry 48+ hours 63 ft²/hr (wash 400, then sanding 75)

Common questions

How many gallons of stain do I need for a deck?

For a 20 × 14 deck (280 sq ft) with no railing, one coat of semi-transparent stain, brushed or rolled, takes about 1.4 gallons: 280 ÷ 225 sq ft per gallon, plus 10% waste. Railings add about 6 sq ft per foot (both faces of a 3 ft rail), and each step about 6 sq ft.

What does it cost to stain a deck?

This calculator gives a painter's cost, not a customer's price. For a 280 sq ft deck with no railing, one coat of semi-transparent stain at $45 a gallon and crew time at $50 an hour, it comes to about $222: $62 of stain and 3.2 hours of staining and power washing. The price you quote adds setup, travel, overhead and profit.

Should I stain both sides of a fence?

For maximum protection and longevity, staining both sides of a fence is recommended. Moisture penetrates from both sides, and leaving one side bare allows water to soak in and cause warping, splitting, and premature rot. Staining both sides adds about two-thirds to the cost of one side, because the rails are only coated once.

What type of deck stain lasts the longest?

Solid stains last the longest (4–6 years) because they have the most pigment, which blocks UV damage. However, they hide the wood grain. Semi-solid stains offer a good balance of durability (3–5 years) and grain visibility. Transparent stains look most natural but need reapplication every 1–2 years.

For detailed cost breakdowns and pricing strategies, see our Deck Staining Cost Guide and Coverage Rates by Surface reference.