Room Dimensions

Deductions

Results

371 ft²
Net Paintable Wall Area
Gross wall area 416 ft²
Window deductions −24 ft²
Door deductions −21 ft²
Ceiling area 168 ft²
Total paintable (walls + ceiling) 539 ft²
Floor area 168 ft²
Room perimeter 52 ft

How to measure a room for painting

  1. Measure each wall — Use a tape measure along the base of each wall. For rectangular rooms, you only need length and width (the calculator handles the perimeter math).
  2. Measure ceiling height — Measure from floor to ceiling in a corner. If the height varies, measure the lowest point.
  3. Count windows and doors — Standard windows deduct about 12 ft² each, standard doors about 21 ft². For unusual sizes, measure width × height.
  4. Check for vaulted ceilings — If one or both end walls have a triangular gable above the standard ceiling line, measure the peak height, use the vaulted ceiling option above, and pick how many gable walls the room has.

Common measurement mistakes

  • Measuring floor area instead of wall area — A 12×14 room has 168 ft² of floor but 416 ft² of wall area (at 8ft ceilings). Floor area and wall area are very different numbers.
  • Forgetting closet walls — If you're painting inside closets, measure those walls separately and add them to your total.
  • Ignoring vaulted ceilings — A vaulted ceiling adds triangular gable area to the walls. A room with a 12ft peak and 8ft walls adds about 28 ft² for each 14ft gable wall, 56 ft² for two.
  • Not accounting for texture — Textured walls (orange peel, knockdown) have more actual surface area than smooth walls. This doesn't affect measurement but does affect paint quantity.

Wall area formulas

Rectangle room: Wall Area = 2 × (Length + Width) × Ceiling Height, minus window and door areas.

Vaulted gable: Gable Area = ½ × Wall Width × (Peak Height − Ceiling Height). Add this for each gable wall.

Vaulted ceiling: Ceiling Area = Length × 2 × √((Width ÷ 2)² + (Peak Height − Ceiling Height)²), the two sloped faces.

PriceTable's estimator, and our full painting calculator, average a vaulted wall's low and high height instead of measuring the triangles, so they come out a little higher than this tool.

Common questions

How do you calculate wall square footage for painting?

Multiply the room perimeter (2 × length + 2 × width) by the ceiling height to get gross wall area. Then subtract the area of windows (typically 12 sq ft each) and doors (typically 21 sq ft each) to get net paintable wall area.

How many square feet is a 12x12 room?

A 12×12 room with 8-foot ceilings has 384 square feet of gross wall area (perimeter of 48 feet × 8 feet). After deducting 2 windows and 1 door, the net paintable wall area is approximately 339 square feet. The floor/ceiling area is 144 square feet.

Do you include windows and doors in wall square footage?

No. Subtract window and door areas from the gross wall area to get net paintable area. Standard windows are about 12 sq ft (3×4) and standard doors are about 21 sq ft (3×7). This deduction prevents you from buying too much paint.

How do you calculate square footage with vaulted ceilings?

For vaulted ceilings, calculate the standard rectangular wall area first, then add the triangular gable area for each gable wall: ½ × wall width × (peak height − standard ceiling height). For example, a 14-foot wall with an 8-foot ceiling and 12-foot peak adds 28 square feet of gable area; two such gable walls add 56.