Room Dimensions

Paint Details

PriceTable's starter wall paint, brushed or rolled
PriceTable's starter interior wall paint adds 5%, exterior 7%

Deductions

Each deducts 12 sq ft
Each deducts 21 sq ft

Results

Gross wall area 416 sq ft
Deductions (windows & doors) −45 sq ft
Net paintable area 371 sq ft
Gallons needed 1.95 gal
Recommended Purchase
Buy 2 × 1-gallon cans

How coverage rates affect quantity

The single biggest variable in paint quantity calculation is the coverage rate — how many square feet one gallon covers. It varies a lot by substrate. These are the rates in PriceTable's starter catalog, brushed or rolled:

Substrate Coverage (ft²/gal) Why It Differs
Drywall (smooth) 400 Smooth, sealed surface absorbs least paint
Plaster 375 Porous surface absorbs more
Wood 350 Grain absorbs paint; depends on species and condition
Concrete 300 Very porous; first coat absorbs significantly more
Brick 250 Mortar joints and porous surface
Stucco 225 Deep texture traps paint; the highest consumption here

For a detailed breakdown by substrate and application method, see our Paint Coverage Rates by Surface guide. For labor hours and cost on a room, try our full painting calculator.

Common questions

How many gallons of paint do I need for a room?

Divide the paintable square footage by the paint's coverage rate (400 sq ft per gallon for wall paint on smooth drywall, rolled), multiply by the number of coats, and add waste. A 12 × 12 room with 8-foot ceilings, two windows and one door has 339 sq ft of wall. Two coats take about 1.8 gallons with 5% waste, so buy 2 gallons.

Does primer count toward the total paint quantity?

No. Primer and paint are calculated separately because they have different coverage rates. In PriceTable's starter catalog, primer covers 325 sq ft per gallon on drywall, 350 on bare wood and 185 on stucco. Calculate primer quantity first, then calculate paint quantity for your finish coats.

How do I account for multiple coats when calculating paint?

Multiply the single-coat quantity by the number of coats. Most color changes and new construction require two coats. Dark-to-light color changes or high-hide situations may need three. Second and subsequent coats typically use slightly less paint because the surface is already sealed, but it is safer to calculate each coat at the full coverage rate.

What is the standard coverage rate for interior latex paint?

In PriceTable's starter catalog, interior wall paint covers 400 sq ft per gallon on smooth drywall, rolled. Other surfaces take more paint: plaster 375, wood 350, concrete 300 and brick 250 sq ft per gallon; exterior paint on stucco covers 225. Always check the manufacturer's data sheet for the specific product.