What does it cost to paint a room?
The short answer: $200–$1,400 per room, depending on size, ceiling height, surface count, prep needs, and your local labor market. The long answer — the one that actually helps you price work or evaluate a quote — requires breaking the job into its components: materials, labor, and prep.
This guide provides room-by-room cost benchmarks, then shows you how to calculate a custom estimate for any room using the same math professional estimators use. For a deeper dive into each component, see our Painting Estimating Guide.
Room-by-room cost ranges
The table below shows typical cost ranges for interior painting. These assume walls and ceiling, two coats of standard-quality latex paint, basic prep (light patching, taping), and professional labor at mid-market rates. Trim, doors, and cabinets are listed separately because not every job includes them.
| Room Type | Typical Size | Ceiling | Cost Range |
|---|---|---|---|
| Bedroom (standard) | 12 × 12 ft | 8 ft | $400–700 |
| Master bedroom | 14 × 16 ft | 9 ft | $600–1,000 |
| Living room | 16 × 20 ft | 9 ft | $800–1,400 |
| Kitchen (walls only) | 12 × 14 ft | 9 ft | $500–900 |
| Bathroom | 8 × 10 ft | 8 ft | $300–500 |
| Hallway | 4 × 20 ft | 8 ft | $200–400 |
| Dining room | 12 × 14 ft | 9 ft | $500–850 |
| Home office | 10 × 12 ft | 8 ft | $350–600 |
What's included in these ranges
- Walls and ceiling — two coats of paint
- Basic prep: light patching (nail holes, screw pops), taping, drop cloths
- Standard-quality latex paint and primer where needed
- Setup and cleanup time
- Professional labor at $45–55/hr loaded rate
What's extra
- Trim and baseboard: priced by the linear foot
- Doors: priced per door (one or both sides)
- Cabinets: priced per door and drawer (see the cabinet painting cost guide)
- Extensive prep: Wallpaper removal, heavy patching, skim coating
- Primer coat: Required for bare surfaces, stain blocking, or dramatic color changes
- Specialty finishes: Accent walls, faux finishes, metallic paints
How to calculate your specific room
Room-by-room ranges are useful for quick ballparks, but every room is different. Here's how to calculate a custom estimate using a 12 × 15 ft room with 9 ft ceilings as a worked example.
Step 1: Calculate paintable wall area
Gross wall area = 54 × 9 = 486 sq ft
Openings = 2 windows (3.5 × 6 ft, 21 sq ft each) + 1 door (32 in × 7 ft, about 19 sq ft) = 61 sq ft
Net wall area = 486 − 61 = 425 sq ft
Step 2: Calculate ceiling area
Step 3: Calculate material cost
Using 400 sq ft/gal for walls and 450 for the ceiling (PriceTable's starter drywall wall and ceiling paints, brush/roll), 2 coats, and each paint's own waste allowance: 5% for wall paint and 8% for ceiling paint (the starter allowances). Paint at example prices of $40 a gallon and $15 a quart. For a full coverage reference by substrate, see our Paint Coverage Rates by Surface guide.
Ceiling paint = (180 ÷ 450) × 2 × 1.08 = 0.86 gal → 1 gallon ($40)
Material cost = $80 + $15 + $40 = $135
Step 4: Calculate labor cost
Using production rates from our Painting Labor Rates Guide: walls at 320 sq ft/hr and the ceiling at 160 sq ft/hr (PriceTable's starter rates; prep is priced as its own lines, as it is in Step 5), plus 20 min setup and 15 min cleanup.
Ceiling painting = (180 ÷ 160) × 2 = 2.25 hr
Setup/cleanup = 0.58 hr
Total labor = 5.49 hr → rounded up to 5.5 hr
Labor cost = 5.5 hr × $50/hr = $275
Step 5: Add prep labor
The walls are rated Good and the furniture is out of the room, so masking covers the openings: PriceTable bills masking labor around windows and doors by the length of edge it tapes, at a starter 100 linear feet an hour.
| Prep labor | Time | Cost (@ $50/hr) |
|---|---|---|
| Masking (2 windows × 2 × (3.5 + 6) = 38 LF, plus the door frame 2.67 + 2 × 7 = 16.67 LF; 54.67 LF at 100 LF/hr) | 0.55 hr | $27.50 |
| Light patching (486 sq ft of gross wall ÷ 330 × 0.5 hr) | 0.74 hr | $37 |
| Prep total | 1.29 hr → rounded up to 1.5 hr | $75 |
These are labor hours. PriceTable also adds the prep materials, such as masking tape and paper, patching compound and caulk, as their own lines; this example leaves them out.
Step 6: Total estimate
| Component | Cost |
|---|---|
| Materials (paint) | $135 |
| Labor (painting) | $275 |
| Labor (prep) | $75 |
| Subtotal (cost) | $485 |
| Gross margin (40% of the selling price) | $323.33 |
| Selling price at a 40% gross margin (cost ÷ 0.60) | $808.33 |
This 12 × 15 room with walls and ceiling, light prep (walls rated Good), and a 40% gross margin lands at about $808.33 ($485 ÷ 0.60), inside the $600–1,000 master-bedroom range in the benchmark table above. A 40% markup on cost would give $679 instead; markup and margin are not the same. Adjusting any input (coverage, labor rate, margin) shifts the price.
Factors that increase cost
- Color changes: Going from dark to light (or vice versa) typically adds a coat of tinted primer plus an extra finish coat, and each extra coat adds both material and labor.
- High or vaulted ceilings: PriceTable's ceiling factors (vaulted 1.3×, cathedral 1.4×) multiply both the wall and ceiling hours, plus you may need specialty equipment.
- Poor wall condition: Extensive patching, skim coating, or wallpaper removal can double the prep hours.
- Specialty finishes: Faux painting, metallic coatings, or multi-color accent walls require more skill and slower application rates.
- Trim, doors, and cabinets: Each added surface type increases scope — a room with crown molding, 6-panel doors, and cabinet work can cost far more than walls alone.
Factors that decrease cost
- Spray application: On large, open rooms with minimal cut-in, spraying walls is faster than rolling (PriceTable's starter factor is 1.4×, or 1.4 times as many square feet an hour), and the time saved often outweighs extra masking.
- Multiple rooms on the same job: Setup/cleanup is amortized, paint can be bought in bulk (5-gal buckets), and crews stay in rhythm.
- Good existing condition: Walls that need only a light sand and two coats skip the expensive prep line items.
- Same color refresh: No primer needed, single coat may suffice, and coverage rates are at their highest with full hide on the first pass.
- Empty rooms: No furniture to move or protect eliminates 15–30 minutes of setup time per room.
Whole-house discount: When painting 5+ rooms on the same job, some contractors offer a small volume discount. The efficiency gains from bulk paint purchasing, reduced mobilization, and continuous workflow often cover the discount while maintaining margins.
Get an instant estimate
Rather than running these calculations by hand for every room, try our free painting calculator. Enter room dimensions, select surfaces, and get material quantities, labor hours, and cost estimates in seconds. It uses the same method as this guide.
How PriceTable automates room-by-room estimation
PriceTable's job scope lets you capture every room in a home — dimensions, surfaces, ceiling type, prep needs — and turns the job scope into a proposal when you choose Preview pricing. Materials are calculated per surface using your coverage rates. Labor is derived from your production rates with appropriate multipliers. Prep is scoped explicitly per room.
The result is a room-by-room estimate you can present on-site, adjust in real time, and turn into a job and bill from once it's signed. No spreadsheets, no second trips, no guessing.
For a step-by-step guide to the full bidding process, see How to Bid a Painting Job.
See how PriceTable works for painting contractors, check pricing, or ballpark a whole job with the free painting cost estimator.